My bike started life as an early 80's Yamaha mono shock dirt bike frame that I found on Craigslist for free, it also came with an unknown bultaco gas tank. The engine is a 82 Yamaha XT200 for $300. I rode the bike up and down the street twice, then promptly pulled the motor. I had to hack, weld and shoehorn the motor into the 2 stroke frame. I modified the rear swing arm and frame to accept an R6 shock that I paid $20 for. I cut about a foot off the front forks and springs. Not having a lathe to re-thread the tube, I drilled and tapped the caps for pipe plugs and then welded the caps to the fork tubes. I added mountain bike shocks as helper springs to stiffen the front end, which gave my bike it's iconic face. The light is a Piaa fog light . The handle bars are mini apes flipped. The seat foam came from a Kawasaki 440ltd. My mother in law did the appolstry. I made the tail from a stainless steel bowl from Walmart. The ignition module and regulator are housed inside. The paint is spray paint, not quite as nice as I would have liked but just ran out if time! I did it all in my garage for under $600. Hauled it 1000 miles in my 93 ranger and had a blast through the whole process!! Thanks Deus for putting in such a great event!!